Rubber Truck Flooring - Molded Vinyl Flooring For Trucks
Replacing the carpet in your truck with a molded rubber vinyl flooring kit is the primary way to increase the functionality of your truck while simultaneously increasing it's longevity.
Whether you need to convert a truck or van into a work vehicle or just need protection from rugged terrain a vinyl flooring replacement is the perfect way to upgrade your vehicle.
An all-weather, vinyl flooring replacement for your truck or van can immediately reduce cleaning costs and hassle, allowing you to use your truck in harsh conditions with no worries about the effect it will have on your truck or vans interior flooring.
During the manufacturing process the rubber flooring is cut to size and then vacuum molded to the specific year, make and model of your truck or van. This results in the closest possible fit and reduces the workload for installation.
The rubber vinyl flooring material is 99mil thick and weighs 0.65lbs-0.76lbs per square foot, so it adds very little bulk or weight to your vehicle but adds a significant level of protection and durability to the footwells of your truck or van.
The rubber flooring is fairly easy to install, some trimming and hole cutting may be required.
Rubber Vinyl Flooring Material
As you can see from the close-up image, the vinyl flooring has a non-slip, textured finish that makes it the perfect floor covering for a truck or van.
Rain, snow, muddy work boots and everyday spillages are no longer hazardous to your truck's interior when you install a rubber flooring kit, the material is 100% waterproof and incredibly easy to clean.
If you need to use your vehicle in taxing work conditions or off-road then you should definitely consider replacing your truck carpet with a durable, custom fit vinyl flooring kit.
Our rubber flooring can by installed in your truck and used on its own or complemented with a set of action backed, floor mats.
Vinyl Flooring For Trucks Color Options
How To Install Vinyl Rubber Flooring in A GMC Truck
READ FULL INSTRUCTIONS BEFORE BEGINNING
Instructions may vary for multi-piece sets.
- Remove new Vinyl Flooring product from box. Lay flat and pop contours back into place. Allow a few hours for product to relax back into proper shape. Check material for accuracy.
- Compare new and old flooring. (New product may have excess material on outer edges.)
- In some applications it may be necessary to use old carpet/flooring as a template for console cuts.
- IMPORTANT: Fold new product in half from front to rear. Place in Truck, lining up molded contour to seat risers or any other identifiable starting point on both driver and passenger sides. Once fitted, continue installation.
- Roll product forward making any cuts needed for brackets, shifters and heater vents etc. while maintaining proper alignment on seat risers or other starting point.
- Next, cut in center at firewall to allow product to go underneath dash.
- Continue same procedure for remainder of installation – working your way to outer edges.
- Once product is properly fitted you are now ready to do the final trimmings on outer edges, seat belts and holes etc.
Note: Applying adhesive to hold product in place is generally not necessary. If desired, only apply a light brush or spray adhesive after correct dry fit has been obtained.
Note: When first removed from the box the vinyl flooring may look flat and lacking contours. Make sure you lay the flooring out and pop the contours back into place and allow time for the vinyl to relax into shape.
Vinyl Truck Flooring Installation Before and After
Use the vehicle selector above to see what vinyl flooring applications are available for your truck, van or SUV
Popular Truck Vinyl Flooring Applications
Select 'Vinyl Material - Molded' from the 'Select Material' dropdown on the flooring product page when viewing your vehicle results.
We can also make our flooring in vinyl for many of our other vehicles including car flooring and SUV flooring. To see if we have a vinyl flooring kit available for your vehicle use the 'Select Your Vehicle' dropdowns above and look for 'Vinyl' in the 'Select Material' dropdown.
If you can't find vinyl flooring for the year/make/model of your truck, call us on 1-888-269-6287 or contact us at support@factoryinteriors.com and we will do all that we can to find rubber flooring for your vehicle.